Products

lathe machine standard operating procedure

Standard Operating Procedure (SOP) Lathe SHOPS

LATHE. STANDARD OPERATING PROCEDURE ‘S.O.P’ All stock must be properly secured in the lathe chuck or mounted prior to the machining process taking place. Use the correct sized clamp or vise for the stock being machined. Turn the chuck or faceplate by hand to ensure there is no binding or danger of the work striking any part of the lathe.

More

Standard Operating Procedure (SOP) Lathe

Standard Operating Procedure (SOP) Lathe • All stock must be properly secured in the lathe chuck or mounted prior to the machining process taking place. Use the correct sized clamp or vise for the stock being machined. • Turn the chuck or faceplate by hand to ensure there is no binding or danger of the work striking any part of the lathe.

More

STANDARD OPERATING PROCEDURES For MANUAL

Feb 03, 2018· STANDARD OPERATING PROCEDURES For MANUAL TOOLROOM LATHES . REVISION: UC Davis V5 DATE: 11-28-2011; Adapted for WSUTC SEAS 02-01-2017 . TABLE OF CONTENTS . SECTION TOPIC(S) PAGE Basic Capabilities 2 Basic Machine Parts 3 & 4 Manual Lathe Safety Rules 5 1 Using The Machine 6 2 Common lathe cutting tools 6 3 Using a lathe chuck 8

More

Standard Operating Procedure Title: SOP-006 Lathe

The cutting action of the lathe is performed by the cutting head when the chuck rotates. This cutting action produces material chips that could be sharp. These chips may be propelled into the air by the rotating motion of the chuck and cause injury. Control Plan: Read and become familiar with machine’s operating procedures before operating

More

SAFE OPERATING PROCEDURE METAL LATHE

equipment or procedure and should be used in conjunction with other references. It is designed as a guide to be used to compliment training and as a reminder to users prior to use. 0488 153 102 0438 330 817 I confirm I am competent to operate a METAL LATHE following my training and reading of the attached Safe Operating Procedure Date Name

More

Lathe Machine Operations [Complete Guide] with Picture & PDF

Dec 09, 2020· Lathe machine operations which are performed by holding the work by a chuck or a faceplate ”Metric taper” is available in seven standard sizes with standard taper angles. Methods of taper turning, To obtain the required size of the taper the form tool is fed slowly straight into the workpiece by operating the cross slide

More

Safety Operating Procedures Metal Lathe

It is designed to be used as an adjunct to teaching Safety Procedures and to act as a reminder to users prior to machine use Date of last review Signature SAFETY OPERATING PROCEDURES Metal Lathe DO NOT use this machine unless the technician has instructed you in its safe use and operation and has given permission.

More

Lathe risk assessment Dyson

Risk Assessment for Lathes February 2016 1 of 4 Ref: Health & Safety Executive Engineering in Workshops Risk Assessment L01: LATHE ESTABLISHMENT operating the machine. Gloves must not be worn when using the machine. Manual Handling and mounting of heavy 3 jaw and

More

Lathe Machine Operations [Complete Guide] with Picture & PDF

Dec 09, 2020· Lathe machine operations which are performed by holding the work by a chuck or a faceplate ”Metric taper” is available in seven standard sizes with standard taper angles. Methods of taper turning, To obtain the required size of the taper the form tool is fed slowly straight into the workpiece by operating

More

Lathe Machine Safe Work Procedure. McGill University

Lathe Machine Safe Work Procedure. DO NOT use this machine unless you have been trained in its safe use and operation Personal Protective Equipment (PPE) Required Eye Protection Appropriate Footwear Appropriate Attire DO NOT operate the lathe wearing loose clothing, finger rings or other jewellery. Long hair must be tied up or

More

Safety Operating Procedures Metal Lathe

Remove all tools from the bed and slides of the machine. Ensure the correct speed for machining process is selected. Remove the chuck key before starting the lathe. OPERATIONAL SAFETY CHECKS. Before making adjustments or measurements, switch off and bring the machine to a complete standstill. Always remove the chuck key from the chuck.

More

Chapter 2: Lathe Machine Manufacturing Processes 4-5

The lathe is a very versatile and important machine to know how to operate. This machine rotates a cylindrical object against a tool that the individual controls. The lathe is the forerunner of all machine tools. The work is held and rotated on its axis while the cutting tool is advanced along the line of a

More

STANDARD OPERATING PROCEDURE

machine and area is clean and swarf disposed of safely. TASK: Operation of a Lathe (Metal Working) STANDARD OPERATING PROCEDURE. Form: 16 Version 1.4 1 September 2003 OHS Consultation and Approval section have been consulted in relation to the development of this Standard Operating Procedure. Note that the OHS Representative (OHS Committee

More

POTENTIAL HEALTH & SAFETY HAZARDS

Number: OH&S 118.41.1 Revision Date: 06/30/2014 Metal Lathe Safety Printed copies of this document are uncontrolled. 1. PURPOSE 1.1 The purpose of this safety procedure is to provide safety guidelines while operating a metal lathe while on Thompson Rivers University campus.

More

Lathe Machine (PDF): Definition, Parts, Types, Operations

Then in 1950, the servomechanism is applied to control lathe and other machine tools by numeric, Direct numerical control machine. The Lathe is the most versatile machine tool among all standard of the machine tool.. Nowadays the manually controlled machine exists like a CNC machine and even do with the help of feed mechanism the lathe machine operates manually.

More

standard operating procedure lathe machine supplier

standard operating procedure cnc milling equipment. Standard Operating Procedure Use machine to mill work piece as desired When finished turn off milling machine right away Wait until spindle has completely stopped before unclamping work piece Clean machine after use and dispose of debris (see Waste Management Procedures) For other inquiries see MillingDrilling Manual

More

Standard Operating Procedures National University of

Standard Operating Procedures Remarks: ¾ The Sawing Machine in the lab is a portable machine. It is not meant for large items and precision operation. ¾ As a safety rule of thumb, DO NOT use these machines if the material to be operated cannot be firmly clamp using the vice bench.

More

Lathe risk assessment Dyson

Risk Assessment for Lathes February 2016 1 of 4 Ref: Health & Safety Executive Engineering in Workshops Risk Assessment L01: LATHE ESTABLISHMENT operating the machine. Gloves must not be worn when using the machine. Manual Handling and mounting of heavy 3 jaw and

More

Standard Operating Procedures for Tool Room Lathes

May 07, 2015· Lathes are very versatile. They are usually used to machine (turn) round (cylindrical) parts, but can also produce many unique and irregular shapes. A lathe can drill, ream, turn, knurl, cut and shape cylindrical parts. The type of machine in the UCR Mechanical Engineering Machine Shop is a manual lathe, also known as a tool room lathe.

More

STANDARD OPERATING PROCEDURE CNC Router

It is designed to be used as an adjunct to teaching Safety Procedures and to act as a reminder to users prior to machine use. Document: SP-091-C Last reviewed: 06/06/13 STANDARD OPERATING PROCEDURE CNC Router DO NOT use this machine unless you have been trained and assessed to a competent level in its safe use and operation, and have been given

More

STANDARD OPERATING PROCEDURE

TASK: VERTICAL & HORIZONATAL MILLING MACHINE STANDARD OPERATING PROCEDURE. Form: 16 Version 1.4 1 September 2003 OHS Consultation and Approval (Ensure this section is completed and copied onto rear of SOP) OHS Consultation (Completion Instructions)

More

Metalworking Machines Lathes : OSH Answers

Use a barrier guard when operating the lathe in semi-automatic or automatic mode. Guard all power transmission parts. Remove all tools, measuring instruments and other objects from saddle or lathe bed before starting machine. Keep all lathe cutting tools sharp. Ensure that the chip and coolant shields are in

More